LINKSYS WRE54G VER 3 DRIVER

How do I prevent these drops of signal? I know I should not have it an open connection, but I do not know how to change it. This post has been flagged and will be reviewed by our staff. At this point, with the extender still hard wired to your router, it is a good idea to update the extender’s firmware. Once you plug up the extender do a another site scan and try connecting again and this time it should connect to the extender. Basically anything that is on the same frequency as your wireless router or extender 2. When setup screen comes back after extender reboot, change the SSID to match that of your router.

Uploader: Nemuro
Date Added: 27 May 2009
File Size: 17.46 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 1891
Price: Free* [*Free Regsitration Required]

All 3 laptops in use are Dell.

Linksys Wireless-g Range Expander Wre54g Version 3

If you are running Windows 7 install the “Xirrus Wi-fi Monitor” desktop gadget and it will show 2 SSID’s and allow you to look at signal strength and frequency, and mac address of each device under windows 7.

Basically anything that is on the same frequency as your wireless router or extender 2. The computer where it was originally set up is using Windows XP. If this is not done before connecting the extender to the router via the ethernet cable, you will not be able to login to the extender.

Linksys WRE54G V.3 “EASY SETUP INSTRUCTIONS” – Forums – CNET

I’m trying to follow your instructions above – but I can’t get past step 4. Hi there, Nice guide, I’ve started getting a message on my windows xp that the ip is used by another computer when I connect the range expander and change the gateway to the ip address of the router!! What user name should I use? The MAC address appears at the top of the information window when you log on to the range extender, following the above instructions Cheers!

  ACER DC300 DRIVER

Can’t get 2 blue lights. How do I prevent these drops of signal? Nice guide, Linisys started getting a message on my windows xp that the ip is used by another computer when I connect the range expander and change ,inksys gateway to wre554g ip address of the router!!

Solved: WRE54G v3 – Easy, Foolproof setup instructions. – Linksys Community

You are posting a reply to: Message 6 of 45 99, Views. I’d tried nuerous times to get it working. If I make it secure, Can my new laptop with Windows 7 also use it? Once wr54g wired you can log into the extender at As it is, the expander is useless. You should not be experiencing signal drop when the WRE54G wireless extender is being used. Ok, I connected the expander directly via cable per your instructions and updated the firmware from 3. At this point, with the extender still hard wired to your router, it is a good idea to update the extender’s firmware.

  AMD TURION ML 40 DRIVER DOWNLOAD

When setup screen comes back after extender reboot, change the SSID to match that of your router. Got 2 blue lights.

No user name – just password “admin”. You could try switching channels on the wireless extender and the wireless router and see if that works. Open an internet browser and type in ” CD wasn’t working at all for me; this fixed things pretty quickly.

The WRE54G is NOT user lin,sys, but following above steps should get you up and running under your encryption of choice, and prevent it going into trash!

Message 5 of 45Views. Then once you have two blue lights, manually configure your encryption as listed above.

If you can’t get the two blue lights double check your firmware version is 3. Message 9 of 45 97, Views. Once you plug up the extender do a another site scan and try connecting again and this time it should connect to the extender. Beside after ,inksys up everything, I took the expander a bit wre54v from the router and the signal was really weak, It seems that it is not connecting to it. Message 10 of 45 96, Views.